NC spotting drill, sol. carbide 142° TiAlSiN, dia. 6 mm x 140 mm HB shaft, long
Brand: ATORN
Surface: TiAlSiN
Length: 140 mm
Art.-no. 11116060
Manufacturer article no. 10916176
EAN 4050293695915
Application
For 142° spot drilling for the following twist drills on CNC machines.
Execution
- Spiral-fluted, extra long design
Advantage
- Extra long design with precise point geometry and chisel edge that ensure geometrically accurate and process-reliable spot drilling, even with deeply recessed or hard-to-access components
- The follow-on tool does not run off centre
- Precise gauge thanks to special point thinning of the chisel edge
- Maximal service life thanks to innovative coating
Notes
Diameter less than 6 mm with HA shaft
Brand | ATORN |
Main EAN Code | 4050293695915 |
Manufacturer Part Number | 10916176 |
Angle of the tip | 142 Degree |
Cutting material | SC |
Surface | TiAlSiN |
Tool holding device | HB parallel shank |
Cutting edge diameter | 6 mm |
Cutting edge length | 20 mm |
Length | 140 mm |
f steel 1300 | 0.14 mm/r |
Gross Weight | 0.040 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/r] with diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 60-90 | 0.13 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 60-85 | 0.13 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 60-75 | 0.13 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 40-75 | 0.13 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 40-75 | 0.11 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 50-70 | 0.11 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 20-30 | 0.11 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 30-50 | 0.11 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 30-50 | 0.11 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 30-50 | 0.11 | ⚫ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 15-35 | 0.11 | ⚫ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 180-260 | 0.16 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 150-210 | 0.14 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 50-90 | 0.13 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 55-100 | 0.13 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 100-150 | 0.05 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 40-60 | 0.13 | ⚫ | |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 120-170 | 0.13 | ⚫ |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 40-50 | 0.13 | ⚫ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | - | |||
| 3.10 Graphite | C8000 | <60 | - | |||
| 3.11 Composite materials | - | |||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 60-90 | 0.12 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 60-90 | 0.12 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 60-90 | 0.12 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 15-40 | 0.05 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 15-20 | 0.05 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 15-20 | 0.05 | ⚫ |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 10-18 | 0.05 | ⚫ |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | - | |||
Last viewed
HAZET 9013 LGTT pneumatic impact wrench with long spindle 186 mm
BOSCH Bohrfutter schlüssellos 2608572062
HAZET Schnellspann Abzieher 2-armig 1750-44
Drawer, 90 mm/70 mm, full ext., 200 kg, colour opt. for 800 B int.: 900x700 mm
MITUTOYO gauge block, JCSS certificate, 175 mm, tolerance class 1, ceramic
ATORN solid carbide multi-tooth mill diameter 20.0 x 38 x 58 x 100 mm T=8 RT65
