ORION NC spotting drill HSSE-TiN 90°, 8.0 mm x 79 mm HA
Brand: ORION
Surface: TiN
Length: 79 mm
Art.-no. 11019581
Manufacturer article no. 11019581
EAN 4053625220120
Application
For NC spot drilling on conventional and CNC machines.
Execution
- spiral-fluted design with relief grinding
Advantage
- profile-ground, cost-effective NC spotting drill
- short design with cross-cutter
- 90° NC spotting drill for spot drilling and countersinking in a single action
- TiN coating for increased service life requirements
Brand | ORION |
Main EAN Code | 4053625220120 |
Manufacturer Part Number | 11019581 |
Angle of the tip | 90 Degree |
Cutting material | HSSE |
Surface | TiN |
Tool holding device | HA parallel shank |
Cutting edge diameter | 8 mm |
Cutting edge length | 25 mm |
Length | 79 mm |
f steel 1000 | 0.07 mm/r |
Product Group | 1AO |
Gross Weight | 0.028 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/r] with diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 30-65 | 0.08-0.1 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 30-65 | 0.08-0.1 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 25-55 | 0.08-0.1 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 20-40 | 0.06-0.08 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 20-30 | 0.06-0.08 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 12-30 | 0.05-0.06 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 10-25 | 0.05-0.06 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 8-20 | 0.05-0.06 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 8-20 | 0.05-0.06 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 8-20 | 0.05-0.06 | ⚫ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 10-25 | 0.05-0.06 | ⚫ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 60-120 | 0.09-0.1 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 60-95 | 0.09-0.1 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 20-50 | 0.08-0.1 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 30-60 | 0.08-0.1 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 50-70 | 0.09-0.1 | ⚫ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 60-120 | 0.09-0.1 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 20-50 | 0.09-0.1 | ⚫ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 10-25 | 0.09-0.1 | ⚫ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 10-25 | 0.09-0.1 | ⚪ | |
| 3.10 Graphite | C8000 | <60 | 8-15 | 0.09-0.1 | ⚪ | |
| 3.11 Composite materials | - | - | ⚪ | |||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 15-40 | 0.06-0.08 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 15-40 | 0.06-0.08 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 15-40 | 0.06-0.08 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 5-10 | 0.03-0.035 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 5-10 | 0.03-0.035 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 5-10 | 0.03-0.035 | ⚪ |
Last viewed
Shrink-fit chuck HSK63 (ISO 12164) 10 mm A=70 mm
ATORN end mill PM TiAlN, teeth = 4, 10.0 mm, type HR, DIN 1835B long shank
KERN UIB 600K-1 pallet scales, weighing range 600 kg, gradation 0.2 kg
ATORN screw tap HSSE vap. B 374 0° MF24 2mm ISO2 D≤3xD CNC des. P
ANSMANN battery and button cell tester, alkaline
Clamping sleeve DIN 6328 MK 3/16 mm D/12 mm
ORION solid carbide HPC end mill, dia. 14.0x16x73 mm, HA shaft