ORION SC HSC hard cutter TiAlN extra long 20.0 x 60 x 126mm DIN 6535 HA shaft
Brand: ORION
Surface: TiAlN
Length: 126 mm
Art.-no. 16883201
Manufacturer article no. 16883201
EAN 4039247456642
Application
HSC milling also for dry machining, for machining up to 64 HRC
Execution
- Solid carbide ultra-fine grain
- Straight shank pursuant to DIN 6535 HA
- TiAIN-coated
- Without centre cutting
Brand | ORION |
EAN | 4039247456642 |
Manufacturer Part Number | 16883201 |
Cutting material | SC |
Surface | TiAlN |
Type | H |
Number of cutting edges (Z) | 8 PCS |
Twist angle | 50° |
Tool holding device | HA parallel shank |
Construction length | Long |
Cutting edge diameter | 20 mm |
Cutting edge length | 60 mm |
Length | 126 mm |
Shank diameter | 20 mm |
fz hard 65 HRC | 0.04 mm |
Harmonized System Code | 82077031 |
Gross Weight | 0.517 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | - | - | |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | - | - | |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | - | - | |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | - | - | ⚪ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | - | - | ⚪ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | - | - | ⚪ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | - | - | ⚪ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 70-80 | 0.04 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 80-85 | 0.04 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 45-100 | 0.04 | ⚫ |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 50-80 | 0.04 | ⚫ |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 50-80 | 0.04 | ⚫ | |
Last viewed
ORION indexable insert, positive, CCMT 060204-FU OHC7615
ATORN SC mini end mill, long, diameter 0.4 x 0.6 x 3 x 50 mm T=2 RT65
MILWAUKEE Quik-Lok adapter for circular cutter 4932479553
KLINGSPOR grinding discs velcro-bonded ceramic 115 mm grain 80 without hole 325556
Factory calibration for thread gauge 3–50 mm
KNIPEX Screwdriver Plus-Minus PZ SLIM VDE 212 mm Article 98 25 02 SLS
PFERD felt polishing point, cyl. 25x30 mm, shaft diameter 6 mm with centre hole
ATORN screw tap SC TICN D DIN 371 0° M4 0.7 mm ISO2 x D/S 1.5xD CNC conv. H
FEIN stainless steel set standard surface 63721006040
