ORION SC chamfer mill, double ended, 90°, diameter 12 mm T5 TiAlN HB
Brand: ORION
Surface: TiAlN
Length: 90 mm
Art.-no. 11560120
Manufacturer article no. 11560120
EAN 4053625780037
Application
For producing 45° chamfers and for deburring up to 1,300 N/mm²
Execution
- 5 teeth
- Double-ended design for twofold benefits
- HB shank DIN 6535/2x180° offset
 | |
Brand | ORION |
Main EAN Code | 4053625780037 |
Manufacturer Part Number | 11560120 |
Cutting edge diameter | 12 mm |
Werkstückkante | 45 Grad |
Chamfer angle | 90 Degree |
Type | N |
Number of cutting edges (Z) | 5 PCS |
Insert diameter min. | 1.2 mm |
Surface | TiAlN |
Shank diameter | 12 mm |
Tool holding device | HB parallel shank |
Cutting edge length (S) | 7.6 mm |
Length | 90 mm |
Gross Weight | 0.149 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 90-100 | 0.045 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 120-140 | 0.08 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 100-120 | 0.08 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 75-85 | 0.045 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 75-85 | 0.045 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 65-75 | 0.045 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 70-75 | 0.045 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 90-100 | 0.045 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 60-75 | 0.03 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 55-70 | 0.03 | ⚫ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 55-60 | 0.045 | ⚫ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 280-300 | 0.07 | ⚪ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 260-280 | 0.07 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 110-130 | 0.07 | ⚪ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 130-150 | 0.07 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 130-150 | 0.07 | ⚪ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 150-170 | 0.07 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | - | |||
| 3.08 Duroplast | Bakelit, Melamin | <150 | - | |||
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | - | |||
| 3.10 Graphite | C8000 | <60 | - | |||
| 3.11 Composite materials | - | |||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 90-110 | 0.06 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 80-90 | 0.06 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 85-95 | 0.06 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 20-30 | 0.03 | ⚪ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 20-30 | 0.03 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 20-30 | 0.03 | ⚪ |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 30-40 | 0.06 | |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 25-35 | 0.06 | ||
Last viewed
WIDIA TOP drill M1 removable disc solid carbide TiAIN diameter 8.4 mm W10
ATORN SC GRP end mill DC T4 diameter 8.0 x 8 x 22 x 76 mm
WIDIA backing round SKRN100300
FEIN Kraftstecknuss Schlüsselweite 41 mm 62405329010
ATORN V-block jaw type PB 160 mm with horizontal and vertical V-block
METABO ASC 55 EU charger for batteries from 12–36 V
