ORION SC end mill HPC 3xD 6x18x62 mm HB shank T=4 ULTRA PRO
Brand: ORION
Surface: ULTRA PRO
Length: 62 mm
Art.-no. 16851866
Manufacturer article no. 16851866
EAN 4053625782420
Application
HPC end mill with unequal twist and unequal pitch for universal roughing and finishing.
Execution
- Solid carbide ultra-fine grain
- Straight shank in accordance with DIN 6535 HB
- ULTRA PRO-coated
- with clearance
- unequal helix angle 35°/38°
- with edge protection chamfer
- Cutting edge rounding
- Centre cutting
- unequal cutting edge pitch
- Chip breaker on every cutting edge
Advantage
- optimal suitability for trochoidal milling
- with chip breaker geometry for short chips
- HPC geometry for maximum feed rates and smooth running
- suitable for large cutting depths
Brand | ORION |
Main EAN Code | 4053625782420 |
Manufacturer Part Number | 16851866 |
Cutting material | SC |
Surface | ULTRA PRO |
Type | N |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 35° |
Tool holding device | HB parallel shank |
Construction length | Long |
Cutting edge diameter | 6 mm |
Cutting edge length | 18 mm |
Clearance length | 24 mm |
Length | 62 mm |
Edge protection chamfer length | 0.1 mm |
Clearance diameter | 5.8 mm |
Shank diameter | 6 mm |
fz steel 1000 | 0.05 mm |
Gross Weight | 0.026 kg |
Last viewed
ATORN SC torus milling cutter, standard diameter 16.0 x 32 x 90 mm r2.0 T=4 RT52
ATORN ang. milling cutter, 90 deg., with internal cooling, diam. 125.0 mm T=10
GEDORE VDE screwdriver set 7-piece slotted 2.5/4/5.5/6.5 mm PH0, PH1, PH2
META CLIP full wall frame galv. VW2 N 2500x600 without clamp foot and cover cap
ORION radius cutter T=2 long diameter 12.0 x 12 x 26 x 100 mm, HA shaft
VARIOFIT sw-600.510 heavy-duty table trolley with two load areas
HAZET 9032N-1 pneumatic rod grinder, straight