
ORION SC end mill, short, T=4 10.0 x 14mm, TiAlN, type H, shaft DIN 6535HB
Brand: ORION
Surface: TiAlN
Length: 65 mm
Art.-no. 16837310
Manufacturer article no. 16837310
EAN 4039247575299














Application
End mill for universal processing.
Execution
- Solid carbide ultra-fine grain
- Up to Ø 5 mm straight shank in line with DIN 6535 HA
- From Ø 6 mm straight shank in line with DIN 6535 HB
- TiAIN-coated
- Centre cutting
- Short version
- Very high feed rates possible
Brand | ORION |
EAN | 4039247575299 |
Manufacturer Part Number | 16837310 |
Cutting material | SC |
Surface | TiAlN |
Type | H |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 30° |
Tool holding device | HB parallel shank |
Construction length | Short |
Cutting edge diameter | 10 mm |
Cutting edge length | 14 mm |
Length | 65 mm |
Shank diameter | 10 mm |
fz steel 1000 | 0.08 mm |
Harmonized System Code | 82077031 |
Gross Weight | 0.068 kg |
Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
---|---|---|---|---|---|---|
1.00 Steels | ||||||
1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 240-260 | 0.045-0.07 | ⚫ |
1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 240-260 | 0.045-0.07 | ⚫ |
1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 210-230 | 0.045-0.07 | ⚫ |
1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 210-230 | 0.04-0.06 | ⚫ |
1.05 Cast iron | GS-45 | <1000 | 1.0446 | 100-150 | 0.04-0.06 | ⚫ |
1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 120-170 | 0.03-0.05 | ⚫ |
1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | - | - | |
1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 120-150 | 0.03-0.05 | ⚫ |
1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 120-140 | 0.03-0.05 | ⚫ |
1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 110-130 | 0.03-0.05 | ⚫ |
4.00 Cast metal | ||||||
4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 120-160 | 0.045-0.07 | ⚫ |
4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 120-160 | 0.045-0.07 | ⚫ |
4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 120-160 | 0.045-0.07 | ⚫ |
6.00 Hard materials | ||||||
6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 80-90 | 0.022-0.03 | ⚫ |
6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 80-90 | 0.022-0.03 |