ORION SC quarter circle milling cutter, 1.75 mm, concave, DIN 6535HA shaft
Brand: ORION
Surface: Uncoated
Length: 50 mm
Art.-no. 16711775
Manufacturer article no. 16711775
EAN 4039247574032
Application
Quarter circle milling cutter for machining complex forms, e.g. for very small radii on bores. With reduced diameter on the radius runoff so it can be used even in confined working conditions.
Execution
- Straight shank pursuant to DIN 1636 HA
- Straight grooved
- K15 micro-fine grain
Brand | ORION |
Main EAN Code | 4039247574032 |
Manufacturer Part Number | 16711775 |
Cutting material | SC |
Surface | Uncoated |
Type | N |
Number of cutting edges (Z) | 2 PCS |
Tool holding device | HA parallel shank |
Radius | 1.75 mm |
Min. cutting edge diameter | 1.5 mm |
Max. cutting edge diameter | 5.6 mm |
Clearance length | 6 mm |
Length | 50 mm |
Clearance diameter | 5.6 mm |
Shank diameter | 6 mm |
fz steel 1000 | 0.019 mm |
Gross Weight | 0.024 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 70-80 | ⚫ | |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 70-80 | ⚫ | |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 70-75 | ⚫ | |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 40-60 | ⚫ | |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 40-50 | ⚫ | |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 20-35 | ⚫ | |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 20-35 | ⚫ | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 20-30 | ⚫ | |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 20-30 | ⚫ | |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 20-30 | ⚫ | |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 20-35 | ⚫ | |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 180-200 | ⚫ | |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 150-200 | ⚫ | |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 60-70 | ⚫ | |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 60-70 | ⚫ | |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 70-80 | ⚫ | |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 150-200 | ⚫ | ||
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 70-80 | ⚫ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 150-200 | ⚫ | ||
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 60-80 | |||
| 3.10 Graphite | C8000 | <60 | - | |||
| 3.11 Composite materials | - | |||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 60-70 | ⚫ | |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 60-70 | ⚫ | |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 60-70 | ⚫ | |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 10-30 | ⚪ | |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 10-30 | ⚪ | |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 10-30 | ⚪ | |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 10-30 | ||
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 10-30 | |||
Last viewed
METABO Mega 400-50 D compressor, V-belt driven portable compressed air system
WIHA Multitool PocketStar TX Tamper Resistant mit Bohrung 7-teilig 25128
ORION SC torus milling cutter TiAlN T4, 3.0 x 50 mm, R=0.5 mm, shaft HA
ATORN thread cutting inserts, sub-prof 60° HW5615 16 (ER/EL) A60 L 0.5-1.5mm
ATORN surface chuck (Weldon) BT40 (ISO 7388-2) dia. 20 mm A=160 mm
ATORN solid carbide drill UNI TiAlNplus 3xD with IC 10.3 mm straight shank HA