ORION SC torus milling cutter TiAlN T4, 16.0 mm x 92 mm, R=1.0 mm, HA shaft
Brand: ORION
Surface: TiAlN
Length: 92 mm
Art.-no. 16942027
Manufacturer article no. 16942027
EAN 4039247539116
Application
HSC torus milling cutter with a short cutter for machining steels up to 1300 N/mm² and for hard milling.
Execution
- Solid carbide ultra-fine grain
- Straight shank in accordance with DIN 6535 HA
- TiAIN-coated
- With clearance
- Edge radius
- Standard design
Advantage
- specially developed coating for hard machining
- Optimised cutting geometry for plunge milling
Brand | ORION |
Main EAN Code | 4039247539116 |
Manufacturer Part Number | 16942027 |
Cutting material | SC |
Surface | TiAlN |
Type | H |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 30° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 16 mm |
Cutting edge length | 20 mm |
Clearance length | 44 mm |
Length | 92 mm |
Clearance diameter | 15 mm |
Shank diameter | 16 mm |
Edge radius | 1 mm |
fz hard 65 HRC | 0.11 mm |
Harmonized System Code | 82077031 |
Gross Weight | 0.243 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | - | - | |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | - | - | |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | - | - | |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | - | - | ⚪ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | - | - | ⚪ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | - | - | ⚪ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | - | - | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | - | - | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | - | - | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 80-170 | 0.03 | ⚫ |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 75-140 | 0.03 | ⚫ |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 75-140 | 0.03 | ⚫ | |
Last viewed
KLINGSPOR core bits 56x2.5x300 mm 5 segments 24x2.5x10 mm 1/2 inch 325721
ATORN hard. ref. plate, hard. value approx. 85 HR 2.5/62.5 60x60x16mm, square
RAU solid beech worktop 2000x700x40 mm with finger-joint gluing
GÜNZBURGER window cleaner ladder w/ steps, middle sect., clip-step R13, 5 steps
ORION lead wire collar 1 kg wire diameter 0.3/0.5 x 200 mm iron zinc-plated
ATORN SC HPC torus milling cutter, Ø 6.0 x 13 x 20 x 57 mm, HA shaft, r=0.3 mm
