ORION countersink, 90°, HSS, T=3, extremely unequal pitch, 8.3 x 50 mm

Name: ORION countersink, 90°, HSS, T=3, extremely unequal pitch, 8.3 x 50 mm
Brand: ORION
SKU: 11501690

Brand: ORION

Surface: TiAlN plus

Length: 50 mm

DIN: 335

Art.-no. 11501690

Manufacturer article no. 11501690

EAN 4053625618613

All versions

Manufacturer information

Specification

Application

For producing 90° counterbores up to 1300 N/mm².

Execution

Profile-ground triple-edge countersink with radial relief, with extremely uneven pitch

Advantage

Radial relief ensures optimum chip breaking
Uneven pitch ensures excellent surfaces without chatter marks and minimisation of cutting forces
3-sided shaft ensures very good power transmission and prevents the tool from spinning in the drill chuck or cordless drill

Notes

Note: The 6.3-mm diameter design does not have a 3-face shaft

Technical information

Brand	ORION
EAN	4053625618613
Manufacturer Part Number	11501690
Countersink angle	90 Degree
Cutting material	HSS
Surface	TiAlN plus
Number of cutting edges	3 PCS
Tool holding device	Parallel shank with three tightening surfaces
Cutting edge geometry	Extremely unequally divided
Spot-facer diameter	8.3 mm
Tip diameter	2.0 mm
Shank diameter	6 mm
Length	50 mm
f steel 700	0.1 mm/r
DIN	335
Harmonized System Code	82079091
Gross Weight	0.021 kg

Material groups for cutting values	Description regarding DIN	Strength Class [N/mm²]	Material No.	Vc [m/min]	f [mm/r] with diameter	Suitability
1.00 Steels
1.01 Free machining steel	9 S 20	< 900	1.0711	30-40	0.08-0.12	⚫
1.02 Structural steel	ST 37-2	<500	1.0037	30-40	0.08-0.12	⚫
1.03 Structural steel	ST 60-2	> 500	1.7735	30-35	0.08-0.12	⚫
1.04 Heat-treated steel	42 CrMo 4	<1000	1.7225	30-35	0.08-0.12	⚫
1.05 Cast iron	GS-45	<1000	1.0446	20-25	0.06-0.09	⚫
1.06 Case-hardened steel	16 MnCr 5	<1200	1.7131	10-25	0.06-0.09	⚫
1.07 Ferritic/martensitic stainless steel	X 10 Cr 13	<1100	1.4006	6-15	0.06-0.09	⚪
1.08 Heat-treated steel	43 CrMo 4	>1000	1.3563	7-12	0.06-0.09	⚫
1.09 Nitriding steel	31 CrMoV 9	<1300	1.8519	8-25	0.06-0.09	⚫
1.10 Tool steel	X 38 CrMoV 5 1	<1300	1.2343	3-12	0.06-0.09	⚫
2.00 Stainless steels
2.01 Austenitic stainless steel	G-X 2 CrNiMo 18 15	<1100	1.3953	4-15	0.06-0.09	⚪
3.00 Non-ferrous metals
3.01 Long-chipping aluminium	AI99.9	<500	3.0305	60-100	0.1-0.12	⚪
3.02 Short-chipping aluminium	G-AISi12	<500	3.2581	30-70	0.1-0.12	⚪
3.03 Copper alloy bronze, long-chipping	CuSn4	<1200	2.1016	30-50	0.08-0.12	⚫
3.04 Copper alloy bronze, short-chipping	CuNi12Zn24	<850	2.0730	30-60	0.08-0.12	⚫
3.05 Copper alloy brass, long-chipping	Cu Zn 20	<600	2.0250	50-100	0.1-0.12	⚫
3.07 Thermoplastic	Cu Zn 39 Pb 3	<600	2.0381	50-100	0.1-0.12	⚫
3.07 Thermoplastic	PVC, Acrylglas	<100		20-60	0.1-0.12	⚫
3.08 Duroplast	Bakelit, Melamin	<150		20-60	0.1-0.12	⚫
3.09 Fibre-reinforced plastics	CFK, GFK	<1500		-	-
3.10 Graphite	C8000	<60		20-30	0.1-0.12
3.11 Composite materials				-	-
4.00 Cast metal
4.01 Grey cast iron	GG10	<260 HB	0.6010	10-30	0.08-0.12	⚫
4.02 Spheroidal graphite iron	GGG 40	<310 HB	0.7040	10-30	0.08-0.12	⚫
4.03 Ductile iron	GTW-55	<280 HB	0.8055	10-30	0.08-0.12	⚫
5.00 Special alloys
5.01 Titanium alloy	TiAI5Sn2,5	<1200	3.7115	4-15	0.04-0.07	⚪
5.02 Nickel-based alloy	NiCr21Mo	<1400	2.4858	2-8	0.04-0.07
5.03 Super alloys	X45CrSi 9 3	<1400	1.4718	2-8	0.04-0.07