ORION disposable milling cutter HSSE8 long 8.0 x 19 x 51 mm shaft DIN 1835B

Name: ORION disposable milling cutter HSSE8 long 8.0 x 19 x 51 mm shaft DIN 1835B
Brand: ORION
SKU: 15091080

Brand: ORION

Surface: Uncoated

Length: 51 mm

Art.-no. 15091080

Manufacturer article no. 15091080

EAN 4039247087419

All versions

Manufacturer information

Specification

Application

For universal milling in all material groups. It is not financially viable to resharpen this milling cutter. It is cheaper to use the tool down to the wear limit and replace it with a new one from the factory.

Execution

HSSE Co 8
straight shank in accordance with DIN 1835 B
3 cutters to centre
uncoated

Technical information

Brand	ORION
EAN	4039247087419
Manufacturer Part Number	15091080
Cutting material	HSSE Co8
Surface	Uncoated
Type	N
Number of cutting edges (Z)	3 PCS
Twist angle	30°
Tool holding device	HB parallel shank
Construction length	Normal
Cutting edge diameter	8 mm
Cutting edge length	19 mm
Length	51 mm
Shank diameter	8 mm
fz steel 700	0.054 mm
Harmonized System Code	82077031
Gross Weight	0.012 kg

Material groups for cutting values	Description regarding DIN	Strength Class [N/mm²]	Material No.	Vc [m/min]	fz [mm/T] at diameter	Suitability
1.00 Steels
1.01 Free machining steel	9 S 20	< 900	1.0711	40-45	0.01	⚫
1.02 Structural steel	ST 37-2	<500	1.0037	40-45	0.01	⚫
1.03 Structural steel	ST 60-2	> 500	1.7735	32-36	0.01	⚫
1.04 Heat-treated steel	42 CrMo 4	<1000	1.7225	32-36	0.01	⚫
1.05 Cast iron	GS-45	<1000	1.0446	20-25	0.01	⚫
1.06 Case-hardened steel	16 MnCr 5	<1200	1.7131	35-45	0.01	⚫
1.07 Ferritic/martensitic stainless steel	X 10 Cr 13	<1100	1.4006	18-20	0.01	⚪
1.08 Heat-treated steel	43 CrMo 4	>1000	1.3563	20-25	0.01
1.09 Nitriding steel	31 CrMoV 9	<1300	1.8519	14-16	0.01
1.10 Tool steel	X 38 CrMoV 5 1	<1300	1.2343	14-16	0.01
2.00 Stainless steels
2.01 Austenitic stainless steel	G-X 2 CrNiMo 18 15	<1100	1.3953	20-28	0.01	⚪
3.00 Non-ferrous metals
3.01 Long-chipping aluminium	AI99.9	<500	3.0305	180-350	0.01	⚪
3.02 Short-chipping aluminium	G-AISi12	<500	3.2581	80-90	0.01	⚪
3.03 Copper alloy bronze, long-chipping	CuSn4	<1200	2.1016	30-40	0.01	⚪
3.04 Copper alloy bronze, short-chipping	CuNi12Zn24	<850	2.0730	40-50	0.01	⚪
3.05 Copper alloy brass, long-chipping	Cu Zn 20	<600	2.0250	40-45	0.01	⚪
3.07 Thermoplastic	Cu Zn 39 Pb 3	<600	2.0381	45-55	0.01	⚪
3.07 Thermoplastic	PVC, Acrylglas	<100		120-150	0.01	⚪
3.08 Duroplast	Bakelit, Melamin	<150		80-90	0.01	⚪
3.09 Fibre-reinforced plastics	CFK, GFK	<1500		80-90	0.01
3.10 Graphite	C8000	<60		-	-
3.11 Composite materials				-	-
4.00 Cast metal
4.01 Grey cast iron	GG10	<260 HB	0.6010	30-50	0.01	⚪
4.02 Spheroidal graphite iron	GGG 40	<310 HB	0.7040	30-50	0.01	⚪
4.03 Ductile iron	GTW-55	<280 HB	0.8055	30-50	0.01	⚪
5.00 Special alloys
5.01 Titanium alloy	TiAI5Sn2,5	<1200	3.7115	10-20	0.01	⚪
5.02 Nickel-based alloy	NiCr21Mo	<1400	2.4858	10-20	0.01	⚪
5.03 Super alloys	X45CrSi 9 3	<1400	1.4718	10-20	0.01	⚪