ORION end mill HSSE5 TIALN DIN 844 diameter 20.0 mm
Brand: ORION
Surface: TiAlN
Length: 104 mm
Art.-no. 15263200
Manufacturer article no. 15263200
EAN 4039247890484
Application
Roughing cutter for universal machining.
Execution
- HSSE Co 5
- Roughing teeth
- Centre cutting
- Straight shank in accordance with DIN 1835 B
- TiAlN coating for maximum service life
Brand | ORION |
Main EAN Code | 4039247890484 |
Manufacturer Part Number | 15263200 |
Cutting material | HSSE Co5 |
Surface | TiAlN |
Type | NR |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 30° |
Edge protection chamfer length | 0.2 mm |
Tool holding device | HB parallel shank |
Construction length | Normal |
Cutting edge diameter | 20 mm |
Cutting edge length | 38 mm |
Length | 104 mm |
Shank diameter | 20 mm |
fz steel 700 | 0.09 mm |
Gross Weight | 0.230 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 40-45 | 0.09 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 40-45 | 0.09 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 32-36 | 0.08 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 32-36 | 0.08 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 20-25 | 0.08 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 35-45 | 0.08 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 18-20 | 0.08 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 20-25 | 0.08 | ⚪ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 14-16 | 0.08 | ⚪ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 14-16 | 0.08 | ⚪ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 20-28 | 0.08 | ⚪ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 180-350 | 0.08 | ⚪ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 80-90 | 0.08 | ⚪ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 30-40 | 0.08 | ⚪ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 40-50 | 0.08 | ⚪ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 40-45 | 0.08 | ⚪ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 120-150 | 0.08 | ⚪ | |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 45-55 | 0.08 | ⚪ |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 80-90 | 0.08 | ⚪ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 80-90 | 0.08 | ||
| 3.10 Graphite | C8000 | <60 | - | |||
| 3.11 Composite materials | - | |||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 30-50 | 0.1 | ⚪ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 30-50 | 0.1 | ⚪ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 30-50 | 0.1 | ⚪ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 10-20 | 0.08 | ⚪ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 10-20 | 0.08 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 10-20 | 0.08 | ⚪ |
Last viewed
MAHR 18 EWR digital vernier callipers 300 mm/12 inch, without blade
ORION cemented carbide gauge block tolerance class 1 1.48 mm
Aluminium cross-knurled measuring wheel, circumference 200 mm
BOSCH Schlagbohrschrauber (Akku) 0615A5002X
MITUTOYO tube-shaped internal micrometer, 50–150mm with carbide measuring faces
DAkkS calibration tape measure 5m
RÖHM prism jaw 160 mm SPR
RÖHM normal jaw SGN, 113 mm, one side smooth, one side grooved
ANKE workb., mod. 108 V, panel w. uni. coating 1500 x 700 x 850 mm RAL 7035/7016
ATORN SC mini torus milling cutter, long, Ø 2.0 x 3.0 x 25 x 75 mm r0.2 T2 RT65