ORION end mill HSSE8 DIN 844N, long, 22.0 mm shank DIN 1835B
Brand: ORION
Surface: Uncoated
Length: 141 mm
Art.-no. 15193220
Manufacturer article no. 15193220
EAN 4039247091935
Application
End mill for universal machining in a wide range of materials.
Execution
- HSSE Co 8
- finishing teeth
- centre cutting
- uncoated
- straight shank DIN 1835 B
- 40° twist angle
Brand | ORION |
Main EAN Code | 4039247091935 |
Manufacturer Part Number | 15193220 |
Cutting material | HSSE Co8 |
Surface | Uncoated |
Type | N |
Number of cutting edges (Z) | 5 PCS |
Twist angle | 40° |
Edge protection chamfer length | 0.2 mm |
Tool holding device | HB parallel shank |
Construction length | Long |
Cutting edge diameter | 22 mm |
Cutting edge length | 75 mm |
Length | 141 mm |
Shank diameter | 20 mm |
fz steel 700 | 0.11 mm |
Gross Weight | 0.030 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 40-45 | 0.09-0.1 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 40-45 | 0.09-0.1 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 32-36 | 0.08-0.09 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 32-36 | 0.08-0.09 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 20-25 | 0.08-0.09 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 35-45 | 0.08-0.09 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 18-20 | 0.08-0.09 | ⚪ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 20-25 | 0.08-0.09 | ⚪ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 14-16 | 0.08-0.09 | ⚪ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 14-16 | 0.08-0.09 | ⚪ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 20-28 | 0.08-0.09 | ⚪ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 180-350 | 0.08-0.09 | ⚪ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 80-90 | 0.08-0.09 | ⚪ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 30-40 | 0.08-0.09 | ⚪ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 40-50 | 0.08-0.09 | ⚪ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 40-45 | 0.08-0.09 | ⚪ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 120-150 | 0.08-0.09 | ⚪ | |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 45-55 | 0.08-0.09 | ⚪ |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 80-90 | 0.08-0.09 | ⚪ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 80-90 | 0.08-0.09 | ||
| 3.10 Graphite | C8000 | <60 | - | - | ||
| 3.11 Composite materials | - | - | ||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 30-50 | 0.1-0.12 | ⚪ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 30-50 | 0.1-0.12 | ⚪ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 30-50 | 0.1-0.12 | ⚪ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 10-20 | 0.08-0.09 | ⚪ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 10-20 | 0.08-0.09 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 10-20 | 0.08-0.09 | ⚪ |
Last viewed
ATORN SC torus milling cutter D 6.0 x 6 x 50 x 90mm r=0.5 T2 HA ULTRA DC-coated
ATORN dial gauge, KEEPTRONIC 12.5 mm 0.001 mm increment, multiCOM data output
TESA CAL digital vernier calipers IP 67, measuring range 0–150 mm, round
Magnetic vice jaws 120 mm aluminium with prism
ORION high-perf. drill bit SC TiNAlOX HPC 5xD 5.9 x 6 x 82 mm HB shank with IC
