ORION end mill HSSE8 TIALN DIN 844 diameter 2.0 mm
Brand: ORION
Surface: TiAlN
Length: 51 mm
Art.-no. 15178020
Manufacturer article no. 15178020
EAN 4039247889518
Application
End mill for universal machining in a wide range of materials.
Execution
- HSSE Co 8
- finishing teeth
- centre cutting
- TiAIN coating for maximum service life
- straight shank in accordance with DIN 1835 B
- without edge protection chamfer
Brand | ORION |
Main EAN Code | 4039247889518 |
Manufacturer Part Number | 15178020 |
Cutting material | HSSE Co8 |
Surface | TiAlN |
Type | N |
Number of cutting edges (Z) | 3 PCS |
Twist angle | 30° |
Tool holding device | HB parallel shank |
Construction length | Normal |
Cutting edge diameter | 2 mm |
Cutting edge length | 7 mm |
Length | 51 mm |
Shank diameter | 6 mm |
fz steel 700 | 0.012 mm |
Gross Weight | 0.005 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 40-45 | 0.01 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 40-45 | 0.01 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 32-36 | 0.01 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 32-36 | 0.01 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 20-25 | 0.01 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 35-45 | 0.01 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 18-20 | 0.01 | ⚪ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 20-25 | 0.01 | ⚪ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 14-16 | 0.01 | ⚪ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 14-16 | 0.01 | ⚪ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 20-28 | 0.01 | ⚪ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 180-350 | 0.01 | ⚪ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 80-90 | 0.01 | ⚪ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 30-40 | 0.01 | ⚪ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 40-50 | 0.01 | ⚪ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 40-45 | 0.01 | ⚪ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 120-150 | 0.01 | ⚪ | |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 45-55 | 0.01 | ⚪ |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 80-90 | 0.01 | ⚪ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 80-90 | 0.01 | ||
| 3.10 Graphite | C8000 | <60 | - | |||
| 3.11 Composite materials | - | |||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 30-50 | 0.01 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 30-50 | 0.01 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 30-50 | 0.01 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 10-20 | 0.01 | ⚪ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 10-20 | 0.01 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 10-20 | 0.01 | ⚪ |
Last viewed
ATORN SC TVC end mill, aluminium diameter 6.0x19x21x62mm teeth=4 HB shaft
ATORN machine tap HSSE, 6HX, 0 degrees, form B, M2
ATORN bit C6.3 PH ACR 2 x 25 mm
FEIN cemented carbide core drill bit 35 mm with QuickIN holder
WEICON DF 175 thread sealing tape with lubricant can 715 ml
ATORN screw tap oversize HSSE V3 C 40° 6G M12 1.75
ATORN recessing module AMR-L 20 ADE02 T25 radial