ORION narrow disc mill cutter, HSSE, cross-toothing 160.0 x 2 x 40 mm, form A
Brand: ORION
Art.-no. 14103460
Manufacturer article no. 14103460
EAN 4053625035151
Application
For slot milling and parting off
Execution
- Type A
- Fine cross-toothing
- Cuts on 3 sides
- Hole with longitudinal groove according to DIN 138
Brand | ORION |
Main EAN Code | 4053625035151 |
Manufacturer Part Number | 14103460 |
Type | N |
Number of cutting edges (Z) | 48 PCS |
Milling cutter design standard | DIN 1834 |
Cutting edge diameter | 160 mm |
Bore diameter | 40 mm |
Width of cutting edge | 2 mm |
fz steel 700 | 0.11 mm |
Gross Weight | 0.289 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 20-35 | 0.115 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 20-35 | 0.115 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 20-30 | 0.115 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 18-30 | 0.115 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 16-25 | 0.115 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 16-25 | 0.095 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 14-25 | 0.095 | ⚪ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 12-22 | 0.095 | ⚪ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 12-22 | 0.095 | ⚪ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 12-22 | 0.095 | ⚪ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 7-15 | 0.095 | ⚪ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 140-250 | 0.1 | ⚪ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 140-250 | 0.1 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 20-40 | 0.095 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 20-40 | 0.095 | ⚪ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 120-200 | 0.115 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 130-250 | 0.115 | ⚪ | |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 120-220 | 0.115 | ⚪ |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 120-230 | 0.115 | ⚪ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | - | |||
| 3.10 Graphite | C8000 | <60 | - | |||
| 3.11 Composite materials | - | |||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 20-40 | 0.115 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 10-30 | 0.115 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 10-30 | 0.115 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 10-25 | 0.095 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 10-25 | 0.095 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 8-12 | 0.095 | ⚪ |
Last viewed
WIHA hexagon screwdriver 3 mm, angled, ball end
FEIN Absaug-Set 92602092000
ATORN twist drill TLP HSSE-TiAlN, DIN 340, 8.5 mm x 165 mm x 109 mm, 130°
AMF Spannpratze Krokodil komplett mit DIN 6379 6312VS-13 Nummer 375782
ATORN twist drill U4 HSSE, DIN 338, 1.7 mm x 43 mm x 20 mm, 118°
TESTO 915i thermometer measuring range temp. -50 to +350°C smartphone operation
ATORN groove free tracer NFT-5-06/5 probe tip 5 µm groove depth maximum 10 mm