ORION slotting cutter HSSE8 TIALN DIN 327 diameter 36.0 mm
Brand: ORION
Surface: TiAlN
Length: 112 mm
Art.-no. 15023360
Manufacturer article no. 15023360
EAN 4039247888795
Application
Suitable for universal plunge milling, groove milling and tolerance milling.
Execution
- HSSE Co 8
- finishing teeth
- centre cutting
- TiAlN coating for maximum service life
- short version
Brand | ORION |
Main EAN Code | 4039247888795 |
Manufacturer Part Number | 15023360 |
Cutting material | HSSE Co8 |
Surface | TiAlN |
Type | N |
Number of cutting edges (Z) | 2 PCS |
Twist angle | 30° |
Tool holding device | HB parallel shank |
Construction length | Short |
Cutting edge diameter | 36 mm |
Cutting edge length | 32 mm |
Length | 112 mm |
Shank diameter | 32 mm |
fz steel 700 | 0.076 mm |
Gross Weight | 0.611 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 40-45 | 0.1-0.12 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 40-45 | 0.1-0.12 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 32-36 | 0.09-0.11 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 32-36 | 0.09-0.11 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 20-25 | 0.09-0.11 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 35-45 | 0.09-0.11 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 18-20 | 0.09-0.11 | ⚪ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 20-25 | 0.09-0.11 | |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 14-16 | 0.09-0.11 | |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 14-16 | 0.09-0.11 | |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 20-28 | 0.09-0.11 | ⚪ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 180-350 | 0.09-0.12 | ⚪ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 80-90 | 0.09-0.12 | ⚪ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 30-40 | 0.09-0.12 | ⚪ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 40-50 | 0.09-0.11 | ⚪ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 40-45 | 0.09-0.12 | ⚪ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 45-55 | 0.09-0.12 | ⚪ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 120-150 | 0.09-0.12 | ⚪ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 80-90 | 0.09-0.12 | ⚪ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 80-90 | 0.09-0.12 | ||
| 3.10 Graphite | C8000 | <60 | - | - | ||
| 3.11 Composite materials | - | - | ||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 30-50 | 0.12-0.18 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 30-50 | 0.12-0.18 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 30-50 | 0.12-0.18 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 10-20 | 0.09-0.11 | ⚪ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 10-20 | 0.09-0.11 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 10-20 | 0.09-0.11 | ⚪ |
Last viewed
RÖHM DURO-M 3-jaw ring chuck, lathe chuck 315 mm K6 ISO 702-1 DIN55026
ORION cemented carbide gauge block tolerance class 1 22.00 mm
ATORN screwdriver TX-IP/TX-Plus 20
MITUTOYO digital outside micrometer IP65 measuring range 100–125 mm Digimatic
ATORN solid carbide drill UNI TiAlNplus 5xD without IC 10.1 mm straight shank HA
HOFE additional shelf 1,000x800 mm, light grey, 330 kg load