ORION subland stepped drill bit type N, HSS medium quality grade M4 9 mm HA
Brand: ORION
Surface: Vaporised
Length: 125 mm
DIN: 8374
Art.-no. 11101004
Manufacturer article no. 11101004
EAN 4039247026388
Application
For through holes in accordance with DIN EN 20273 and 90° countersunk screw heads, form A and B, in accordance with DIN 74. For screws in accordance with DIN 963 and 964.
Execution
- Drill and countersink step with independent chip grooves and drill heels; regrinding does not affect the profile
Advantage
- precise alignment of drill diameter and countersink diameter, lower process costs
- universal use, therefore tool costs are reduced to a minimum and user flexibility is increased
 | |
Brand | ORION |
Main EAN Code | 4039247026388 |
Manufacturer Part Number | 11101004 |
Cutting material | HSS |
Surface | Vaporised |
Type | N |
Angle of the tip | 118 Degree |
Coolant supply | External |
Tool holding device | HA parallel shank |
Suitable for screw thread | M4 |
Pilot hole diameter (d1) | 4.5 mm |
Spot-facer diameter (d2) | 9 mm |
Pilot hole length (l3) | 11 mm |
Chip flute length (l2) | 81 mm |
Length (l1) | 125 mm |
Shank diameter | 9 mm |
f steel 700 | 0.07 mm/r |
DIN | 8374 |
Gross Weight | 0.040 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/r] with diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 22-35 | 0.04-0.15 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 22-35 | 0.04-0.15 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 20-30 | 0.04-0.15 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 20-30 | 0.04-0.15 | ⚪ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 15-20 | 0.02-0.1 | ⚪ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 15-18 | 0.02-0.1 | ⚪ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 5-10 | 0.02-0.1 | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 5-10 | 0.02-0.1 | |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 5-10 | 0.02-0.1 | |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 5-8 | 0.02-0.1 | |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 5-10 | 0.02-0.1 | |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 40-60 | 0.06-0.17 | ⚪ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 30-40 | 0.06-0.17 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 25-35 | 0.04-0.15 | ⚪ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 20-30 | 0.04-0.15 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 30-40 | 0.06-0.17 | ⚪ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 15-20 | 0.04-0.15 | ||
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 30-40 | 0.06-0.17 | ⚫ |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 10-18 | 0.04-0.15 | ||
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 10-18 | 0.04-0.15 | ||
| 3.10 Graphite | C8000 | <60 | 5-8 | 0.04-0.15 | ||
| 3.11 Composite materials | - | - | ||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 15-25 | 0.04-0.15 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 15-25 | 0.04-0.15 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 15-25 | 0.04-0.15 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 2-10 | 0.02-0.1 | |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 2-10 | 0.02-0.1 | |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 2-10 | 0.02-0.1 | |
Last viewed
ATORN SC end mill D 3.0 x 9 x 15 x 50mm, HA shaft 3 cutting edges, ULTRA MS
ATORN mini cutting insert AGR 7.0mm B2.0 L15 HC5640
MANNESMANN DEMAG pneumatic thread cutter GE 8-500 P
ATORN indexable insert countersink, single-edge cutter CC..09 24.0 mm HB
ATORN SC multi-tooth mill, long diameter 3.0 x 19 x 30 x 75mm T=6 RT65
KIENINGER cemented carbide indexable insert WPV 20 mm LC610T chip breakers
Drawer, 270 mm/130 mm, full ext., 200 kg, col. opt. for 800 BX int.: 1300x700 mm
Aluminium truck A 1331 V, load capacity 200 kg, W590xH1,300 mm