ORION twist drill VA HSSE, DIN 338, 10.2 mm x 133 mm x 87 mm, 130°
Brand: ORION
Surface: Uncoated
DIN: 338
Length: 133 mm
Art.-no. 11028461
Manufacturer article no. 11028461
EAN 4039247007165
Application
For use in stainless steel, special alloys up to a strength of 1300 N/mm².
Execution
- twist drill with stainless steel profile
Advantage
- Special geometry with aggressive cutter design and free geometry for very smooth cutting
Delivery
Packaging unit: drill Ø 1.0-6.0 mm = 10 pieces (price per piece)
Brand | ORION |
Main EAN Code | 4039247007165 |
Manufacturer Part Number | 11028461 |
Cutting material | HSSE |
Surface | Uncoated |
Type | VA |
Angle of the tip | 130 Degree |
DIN | 338 |
Tool holding device | HA parallel shank |
Cutting edge diameter | 10.20 mm |
Chip flute length | 87 mm |
Length | 133 mm |
f stainless steel | 0.12 mm/r |
Gross Weight | 70 g |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/r] with diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 25-45 | 0.2-0.28 | ⚪ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 25-45 | 0.2-0.28 | ⚪ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 20-40 | 0.15-0.2 | ⚪ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 18-25 | 0.15-0.2 | ⚪ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 18-25 | 0.15-0.2 | ⚪ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 10-25 | 0.1-0.18 | ⚪ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 8-13 | 0.1-0.18 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 8-15 | 0.1-0.18 | ⚪ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 8-18 | 0.1-0.18 | ⚪ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 6-12 | 0.1-0.18 | ⚪ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 10-20 | 0.1-0.18 | ⚫ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 40-100 | 0.2-0.28 | ⚪ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 30-70 | 0.2-0.28 | ⚪ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 15-35 | 0.15-0.2 | ⚪ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 25-50 | 0.15-0.2 | ⚪ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 35-60 | 0.2-0.28 | ⚫ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 60-110 | 0.2-0.28 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 20-40 | 0.2-0.28 | ||
| 3.08 Duroplast | Bakelit, Melamin | <150 | 10-25 | 0.2-0.28 | ||
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 10-30 | 0.1-0.18 | ||
| 3.10 Graphite | C8000 | <60 | 10-30 | 0.1-0.18 | ||
| 3.11 Composite materials | - | - | ||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 20-35 | 0.2-0.28 | |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 20-35 | 0.2-0.28 | |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 20-35 | 0.2-0.28 | |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 3-10 | 0.1-0.18 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 3-10 | 0.1-0.18 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 3-10 | 0.1-0.18 | ⚫ |
Last viewed
GEDORE DREMASTER UK torque wrench 1/2 inch, 20-100 Nm with reversible ratchet
ORION stainless spring steel scale, length 300 mm
ATORN indexable insert DNMG 150608-MPL ACP25T-1
ATORN test pin RSB TC1 1.01 mm x 70 mm
BOSCH Sägeblatt für Stichsäge 2608630808
TESA electronic vernier callipers, 500 mm, 0.01 mm TWIN-CAL, IP67, straight rail