RAU Basic table Series E 1500x500x650-1000 mm Melamine top 22 mm

Worktop with melamine resin coating, 22 mm thick. Top and underside with a light gray melamine resin direct coating. Melamine resin coating in accordance with DIN 68765, splash-proof and dirt-resistant, surface properties in accordance with EN 14322/EN 14323: Abrasion resistance class 3A, scratch resistance N greater than 1.5, stain resistance level ? 3 (e.g. acetone, alcohol, organic solvents, white spirit), susceptibility to cracking level ? 3, resistance to cigarette burns grade 3, resistance to water vapor grade 4, safety certificate with regard to migration behavior, therefore also suitable for use in the food industry. Covering normally flammable (B2) in accordance with DIN 4102. Chipboard core in accordance with EN 309/EN 312 (emission class E1). Light gray, antistatic ABS edge on all sides. System substructure, W1500 x D500 x H630-980 mm. 4-leg frame with two pairs of frame legs made of profile steel tube (45x45x3 mm) including depth bracing (center). Frame legs at the bottom with end element including level compensation and anti-slip knob for safe standing. Frame legs at the top with integrated height adjustment/height adjustment using aluminum profile (40x40 mm), the working height can be continuously adjusted using the profile groove. Cross struts made of profile steel tube (35x35x2 mm) at the top under the worktop (front, rear) and depth struts made of angle iron (40x35x2 mm) with mounting adapter (left, right). The frame legs are prepared for mounting/retrofitting a castor set. Note: This basic table can be supplemented with an extension table of the same depth or less and/or a corner table.