RAU Group workbench 2700x2340x840mm 6x5drawer partial extension Series 499-EA

Solid beech cover plate (25 mm thick).Completely wired and earthed, in accordance with the standards: DIN VDE 0113-1 - final inspection in accordance with the Machinery Directive, DIN EN 60529 (VDE 0470-1) - types of protection by enclosure (IP code) - IP40, DIN EN 61140 (VDE 0140-1) - protection class I.Media attachment including connection cable 09-AL400V (includes 5-pole connection cable with plug) and preparation for supply of air and data cable.Connection cable: cable cross-section per core 2.5 m²; total load up to 10.5 kW.All 6 sides of the media top unit are equipped as follows (from left to right):1x built-in module 09-EM100-400V:Module with three-phase socket outlet with hinged cover 400V / 16A.1xInstallation module 09-EM100-LUFT: Module with compressed air quick coupling G1/4, NW 7.2 brass.1xInstallation module 09-EM100: Module without equipment as dummy cover.1xInstallation module 09-EM200-230V-2DE: Module with 2x socket outlet with hinged cover 230V / 16A (for country/plug: Germany / type F).Installation modules in accordance with the directives: 2001-95-EC - General Product Safety, 2006-42-EC Machinery Directive, 2011-65-EU - Restriction of the use of hazardous substances in electrical and electronic equipment, 2011-35-EU - Provision of electrical equipment within certain voltage limits.Note: Please note that the media attachment must not be opened and each side of the media attachment is subject to a power limit of max. 16A.Solid beech worktop, 40 mm thick.6-Corner worktop (2-part, including worktop-plate connector and fittings), edge length 1350 mm, corner dimensions 2700x2340 mm. Beech frame with finger-joint gluing. Front edge with radius. Surface protection with environmentally friendly lacquer oil. The classic worktop: resilient, pressure-resistant, durable, natural, robust, beautiful, wear-resistant, reusable. 100% from our own production (from the tree to the worktop) with raw material from sustainable and regional forestry.System substructure, H800 mm.6 substructure containers, W580 x D650 x H800 mm, each flush on the right at the edge of the worktop with the following division:5 x drawer size L 1xH60, 1xH90, 1xH120, 1xH180, 1xH270 mmDrawer size L (inside W490 x D560 mm, load capacity 100 kg). Partial extension runners on roller bearings (90 % extension) with self-closing mechanism and return stop. The usable height of the drawer corresponds to the front height minus 15 mm. Drawer tray completely closed for optimum storage of drawer partition sets.Full-length ErgoScript® handle strip: sheet steel base with aluminum-colored overlay and integrated transparent cover (incl. labeling strips).Central locking (pin cylinder lock with 2 keys).Panel set between the substructure containers.