RAU Mobile workbench 8000 1500x700x880 mm 1 drawer, partial extension, beech top

Solid beech worktop, 40 mm thick. Beech latch with finger-joint gluing. Front edge with radius, other edges chamfered. Surface protection with environmentally friendly lacquer oil. The classic worktop: resilient, pressure-resistant, durable, natural, robust, beautiful, wear-resistant, reusable. 100 percent from our own production (from tree to worktop) with raw material from sustainable and regional forestry. System substructure, W1495 x D650 x H840 mm. 4-leg welded frame with two pairs of frame legs made of profile steel tube (45x45x2 mm) including depth bracing (top and bottom). Frame legs with 2 fixed and 2 swivel castors with brakes (castor diameter 125 mm, overall height 150 mm, tread made of thermoplastic rubber (gray, non-marking, 85 degrees Shore), wheel body made of polypropylene). Fixed castors are mounted on the left-hand side, swivel castors with brakes on the right-hand side (expander attachment). Cross struts made of C-profile (40x40x2 mm) at the top under the worktop (front, rear) and at the bottom (rear). Bow handle/sliding handle (supplied loose). 1 underbench drawer on the right, W520 x D650 x H175 mm, with the following division: 1 x drawer size L 1xH150 mm. Drawer size L (inside W490 x D560 mm, load capacity 50 kg). Roller bearing mounted pull-outs (90 percent extension). The usable height of the drawer corresponds to the front height minus 15 mm. Drawer tray completely closed for optimum storage of drawer partition sets. Full-length ErgoScript® handle strip: sheet steel base with aluminum-colored overlay and integrated transparent cover (including labeling strips). Central locking (pin cylinder lock with 2 keys).