RAU Mobile workbench 8000 750x700x880 mm Storage shelf 1 drawer, partial extension

Solid beech worktop, 40 mm thick. Beech latch with finger-joint gluing. Front edge with radius, other edges chamfered. Surface protection with environmentally friendly lacquer oil. The classic worktop: resilient, pressure-resistant, durable, natural, robust, beautiful, wear-resistant, reusable. 100 percent from our own production (from tree to worktop) with raw material from sustainable and regional forestry. System substructure, W745 x D650 x H840 mm. 4-leg welded frame with two pairs of frame legs made of profile steel tube (45x45x2 mm) including depth bracing (top and bottom). Frame legs with 2 fixed and 2 swivel castors with brakes (castor diameter 125 mm, overall height 150 mm, tread made of thermoplastic rubber (gray, non-marking, 85 degrees Shore), wheel body made of polypropylene). Fixed castors are mounted on the left-hand side, swivel castors with brakes on the right-hand side (expander attachment). Cross struts made of C-profile (40x40x2 mm) at the top under the worktop (front, rear) and shelf at the bottom (depth 650 mm at the rear flush with the system substructure, shelf height 405 mm). Bow handle/sliding handle (supplied loose). 1 underbench drawer, W520 x D650 x H175 mm, with the following division: 1 x drawer size L 1xH150 mm. Drawer size L (inside W490 x D560 mm, load capacity 50 kg). Roller bearing mounted pull-outs (90 percent extension). The usable height of the drawer corresponds to the front height minus 15 mm. Drawer tray completely closed for optimum storage of drawer partition sets. Full-length ErgoScript® handle strip: sheet steel base with aluminum-colored overlay and integrated transparent cover (including labeling strips). Central locking (pin cylinder lock with 2 keys).