RAU Mobile workbench 8157 2000x700x880 mm 3 drawers partial extension

Solid beech worktop, 40 mm thick. Beech latch with finger-joint gluing. Front edge with radius, other edges chamfered. Surface protection with environmentally friendly lacquer oil. The classic worktop: resilient, pressure-resistant, durable, natural, robust, beautiful, wear-resistant, reusable. 100 percent from our own production (from tree to worktop) with raw material from sustainable and regional forestry. System substructure, B1995 x D650 x H840 mm. 4-leg welded frame with two pairs of frame legs made of profile steel tube (45x45x2 mm) including depth bracing (top and bottom). Frame legs with 2 fixed and 2 swivel castors with brakes (castor diameter 125 mm, overall height 150 mm, tread made of thermoplastic rubber (gray, non-marking, 85 degrees Shore), wheel body made of polypropylene). Fixed castors are mounted on the left-hand side, swivel castors with brakes on the right-hand side (expander attachment). Bottom shelf (depth 650 mm at rear flush with system substructure, shelf height 620 mm). Bow handle/push handle (supplied loose). 1 underbench container on the right, W580 x D650 x H620 mm, with the following division: 3 x drawer size L 3xH180 mm. Drawer size L (inside W490 x D560 mm, load capacity 100 kg). Partial extension runners on roller bearings (90 percent extension) with self-closing mechanism and return stop. The usable height of the drawer corresponds to the front height minus 15 mm. Drawer tray completely closed for optimum storage of drawer partition sets. Full-length ErgoScript® handle strip: sheet steel base with aluminum-colored overlay and integrated transparent cover (including labeling strips). Central locking (pin cylinder lock with 2 keys).