RAU Mobile workbench 8257 1500x700x880 mm 3 drawers partial extension

Solid beech worktop, 40 mm thick. Beech latch with finger-joint gluing. Front edge with radius, other edges chamfered. Surface protection with environmentally friendly lacquer oil. The classic worktop: resilient, pressure-resistant, durable, natural, robust, beautiful, wear-resistant, reusable. 100 percent from our own production (from the tree to the worktop) with raw material from sustainable and regional forestry. System substructure, W1495 x D650 x H840-1040 mm. 4-leg welded frame with two pairs of frame legs made of profile steel tube (45x45x2 mm) including depth bracing (top and bottom). Frame legs with 2 fixed and 2 swivel castors with brakes (castor diameter 125 mm, overall height 150 mm, tread made of thermoplastic rubber (gray, non-marking, 85 degrees Shore), wheel body made of polypropylene). Fixed castors are mounted on the left-hand side, swivel castors with brakes on the right-hand side (expander attachment). Bottom shelf (depth 650 mm at rear flush with system substructure, shelf height 620 mm). Bow handle/push handle (supplied loose). 1 underbench container on the right, W770 x D650 x H620 mm, with the following division: 3 x drawer size XL 3xH180 mm. Drawer size XL (inside W680 x D560 mm, load capacity 75 kg). Partial extension runners on roller bearings (90 percent extension) with self-closing and return stop, as well as individual pull-out safety catch. The usable height of the drawer corresponds to the front height minus 15 mm. Drawer tray completely closed for optimum storage of drawer partition sets. Full-length ErgoScript® handle strip: sheet steel base with aluminum-colored overlay and integrated transparent cover (including labeling strips). Central locking (pin cylinder lock with 2 keys).