RAU Mobile workbench 8563 2000x700x880 mm 3 drawers partial extension 1 door

Solid beech worktop, 40 mm thick. Beech latch with finger-joint gluing. Front edge with radius, other edges chamfered. Surface protection with environmentally friendly lacquer oil. The classic worktop: resilient, pressure-resistant, durable, natural, robust, beautiful, wear-resistant, reusable. 100 percent from our own production (from the tree to the worktop) with raw material from sustainable and regional forestry. System substructure, W1800 x D650 x H840 mm. 4-leg welded frame with two pairs of frame legs made of profile steel tube (45x45x2 mm) including depth bracing (top and bottom). Frame legs with 2 fixed and 2 swivel castors with brakes (castor diameter 125 mm, overall height 150 mm, tread made of thermoplastic rubber (gray, non-marking, 85 degrees Shore), wheel body made of polypropylene). Fixed castors are mounted on the left-hand side, swivel castors with brakes on the right-hand side (expander attachment). Bow handle/push handle (supplied loose). 1 triple base container, W1710 x D650 x H620 mm, with the following layout: left: 3 x drawer size L 3xH180 mm center: 1 x shelf L (height-adjustable) right: 1 x hinged door size L 1xH540 mm (behind it 1x shelf L (height-adjustable)). Drawer size L (inside W490 x D560 mm, load capacity 100 kg). Partial extension runners on roller bearings (90 percent extension) with self-closing mechanism and return stop. The usable height of the drawer corresponds to the front height minus 15 mm. Drawer tray completely closed for optimum storage of drawer partition sets. Hinged doors with self-retracting spring hinges, opening width 180 degrees. Full-length ErgoScript® handle strip: sheet steel base with aluminum-colored overlay and integrated transparent cover (including label strips). Central locking (pin cylinder lock with 2 keys).