RAU Workbench 2500x700x840mm 2xDrawer Part Pull-out Series 8001A1

Solid beech worktop, 40 mm thick.beech latch with finger-joint gluing. Front edge with radius, other edges chamfered. Surface protection with environmentally friendly lacquer oil. The classic worktop: resilient, pressure-resistant, durable, natural, robust, beautiful, wear-resistant, reusable. 100% from our own production (from tree to worktop) with raw material from sustainable and regional forestry.System substructure, W2445 x D650 x H800 mm.6-foot welded frame with three pairs of frame feet made of profile steel tube (45x45x2 mm) incl. depth bracing (top and bottom). Frame feet at the bottom with end element incl. anti-slip knob for secure footing. Cross struts made of C-profile (40x40x2 mm) at the top under the worktop (front, rear) and at the bottom (rear). The frame legs are prepared for mounting/retrofitting a height adjuster and/or a set of castors.2 underbench drawers, W520 x D650 x H175 mm, with the following division:Left-hand section right-hand section:1 x drawer size L 1xH150 mm.Right-hand section right-hand section:1 x drawer size L 1xH150 mm.Drawer size L (inside W490 x D560 mm, load capacity 50 kg). The usable height of the drawer corresponds to the front height minus 15 mm. Roller bearing mounted pull-outs (pull-out 90 %).full-length ErgoScript® handle strip: sheet steel base with aluminum-colored overlay and integrated transparent cover (incl. labeling strips).pin cylinder lock with 2 keys.