RAU Workbench with chassis 8000 2000x700x880 mm Beech worktop 40 mm

Solid beech worktop, 40 mm thick. Beech transom with finger-joint gluing. Front edge with radius, other edges chamfered. Surface protection with environmentally friendly lacquer oil. The classic worktop: resilient, pressure-resistant, durable, natural, robust, beautiful, wear-resistant, reusable. 100 percent from our own production (from tree to worktop) with raw material from sustainable and regional forestry. System substructure, B1995 x D650 x H840 mm. 4-leg welded frame with two pairs of frame legs made of profile steel tube (45x45x2 mm) including depth bracing (top and bottom). Frame feet at the bottom with end element including anti-slip knob for safe standing. Underframe with eccentric lever (right). The eccentric lever can only be operated up to a maximum load of 300 kg. The chassis can be extended and retracted using the eccentric lever. Chassis with 2 fixed and 2 swivel castors (castor diameter 100 mm, overall height 125 mm, tread made of thermoplastic rubber (non-marking, 85 degrees Shore), wheel body made of polypropylene). Fixed castors are mounted on the left-hand side, swivel castors on the right-hand side (wheel plate attachment). Cross struts made of C-profile (40x40x2 mm) at the top under the worktop (front, rear) and shelf at the bottom (depth 650 mm at the rear flush with the system substructure, shelf height 580 mm). Bow handle/sliding handle (supplied loose).