RAU Workbench with chassis 8162 1500x700x880 mm 4 drawers, partial extension

Solid beech worktop, 40 mm thick. Beech latch with finger-joint gluing. Front edge with radius, other edges chamfered. Surface protection with environmentally friendly lacquer oil. The classic worktop: resilient, pressure-resistant, durable, natural, robust, beautiful, wear-resistant, reusable. 100 percent from our own production (from the tree to the worktop) with raw material from sustainable and regional forestry. System substructure, W1495 x D650 x H840 mm. 4-leg welded frame with two pairs of frame legs made of profile steel tube (45x45x2 mm) including depth bracing (top and bottom). Frame feet at the bottom with end element including anti-slip knob for safe standing. Underframe with eccentric lever (right). The eccentric lever can only be operated up to a maximum load of 300 kg. The chassis can be retracted and extended using the eccentric lever. Chassis with 2 fixed and 2 swivel castors (castor diameter 100 mm, overall height 125 mm, tread made of thermoplastic rubber (non-marking, 85 degrees Shore), wheel body made of polypropylene). Fixed castors are mounted on the left-hand side, swivel castors on the right-hand side (wheel plate attachment). Bottom shelf (depth 650 mm at rear flush with system substructure, shelf height 620 mm). Handle/sliding handle (supplied loose) 1 substructure container on the right, W580 x D650 x H620 mm, with the following division: 4 x drawer size L 2xH120, 2xH150 mm. Drawer size L (inside W490 x D560 mm, load capacity 100 kg). Partial extension runners on roller bearings (90 percent extension) with self-closing mechanism and return stop. The usable height of the drawer corresponds to the front height minus 15 mm. Drawer tray completely closed for optimum storage of drawer partition sets. Full-length ErgoScript® handle strip: sheet steel base with aluminum-colored overlay and integrated transparent cover (including labeling strips). Central locking (pin cylinder lock with 2 keys).