RAU Workbench with mobile frame 8181 1000x700x880 mm 1 drawer with partial extension 1 door

Solid beech worktop, 40 mm thick. Beech latch with finger-joint gluing. Front edge with radius, other edges chamfered. Surface protection with environmentally friendly lacquer oil. The classic worktop: resilient, pressure-resistant, durable, natural, robust, beautiful, wear-resistant, reusable. 100 percent from our own production (from tree to worktop) with raw material from sustainable and regional forestry. System substructure, W999 x D650 x H840 mm. 4-leg welded frame with two pairs of frame legs made of profile steel tube (45x45x2 mm) including depth bracing (top and bottom). Frame feet at the bottom with end element including anti-slip knob for safe standing. Underframe with eccentric lever (right). The eccentric lever can only be operated up to a maximum load of 300 kg. The chassis can be retracted and extended using the eccentric lever. Chassis with 2 fixed and 2 swivel castors (castor diameter 100 mm, overall height 125 mm, tread made of thermoplastic rubber (non-marking, 85 degrees Shore), wheel body made of polypropylene). Fixed castors are mounted on the left-hand side, swivel castors on the right-hand side (wheel plate attachment). U-handle/push handle (supplied loose). 1 substructure container left, W330 x D650 x H620 mm, with the following layout: 1 x slide-in door, behind it 1x vice (jaw width 120 mm) with hinged lift. 1 underbench container on the right, W580 x D650 x H620 mm, with the following layout: 1 x drawer size L 1xH180 mm, 1 x hinged door size L 1xH360 mm. Drawer size L (inside W490 x D560 mm, load capacity 100 kg). Partial extension runners on roller bearings (90 percent extension) with self-closing mechanism and return stop. The usable height of the drawer corresponds to the front height minus 15 mm. Drawer well completely closed for optimum storage of drawer partition sets. Hinged doors with self-retracting spring hinges, opening width 180 degrees. Full-length ErgoScript® handle strip: sheet steel base with aluminum-colored overlay and integrated transparent cover (including label strips). Central locking (pin cylinder lock with 2 keys). Vice: The vice is forged from the best quality steel in die blocks, hardened and is considered unbreakable. Adjustable guides guarantee smooth running at all times. The MDS enables the spindle wrench (also known as the turning knob) to be removed quickly to use any tool with ½ square as a drive tool. The extra large, clean hardened anvil is ideal for smaller straightening and upsetting jobs. Jaw width 120 mm, clamping depth 82.5 mm, clamping width 146 mm, anvil size 75 x 75 mm, total length 365 mm, base diameter 150 mm. Folding lift: The vice is quickly and easily folded under the workbench using the folding lift. The integrated height adjustment device, which allows the vice to be rotated as well as adjusted in height, ensures ergonomic working.