RAU work table Tom height-adjustable 1000x1000x760-1080 mm melamine resin top

Worktop with melamine resin coating, 22 mm thick. Top and underside with a light gray melamine resin direct coating. Melamine resin coating in accordance with DIN 68765, splash-proof and dirt-resistant, surface properties in accordance with EN 14322/EN 14323: Abrasion resistance class 3A; scratch resistance N greater than 1.5; stain resistance level ? 3 (e.g. acetone, alcohol, organic solvents, white spirit); susceptibility to cracking level ? 3; reaction to cigarette burns grade 3; reaction to water vapor grade 4; safety certificate with regard to migration behavior, therefore also suitable for use in the food industry. Covering normally flammable (B2) in accordance with DIN 4102. Chipboard core in accordance with EN 309/EN 312 (emission class E1). Light gray, antistatic ABS edge on all sides. System substructure, W900 x D860 x H740-1060 mm. 4-leg frame with two pairs of frame legs made of profile steel tube (60x30x2 mm) including depth bracing (top and bottom). Frame legs at the bottom with end element including height adjustment. Cross struts made of profile steel tube (50x25x2 mm) at the top under the worktop (front and rear). Stiffening beams at the rear (left and right) as a connection between the pair of frame legs and the rear cross strut. The frame legs are prepared for mounting/retrofitting a castor set. Note: This basic table can be supplemented with an extension table of the same depth.