RAU workbench 900-1 1000x800x825 mm worktop melamine resin coating 28 mm

EGB melamine worktop 28 mm top and underside with a conductive, light gray melamine resin direct coating. Melamine resin coating in accordance with DIN 68765. Volume conductive middle layer. Normal abrasion resistance, limited scratch and impact resistance. Stain-resistant to group 1 and 2 substances in accordance with DIN 53799 (e.g. acetone, alcohol, white spirit, nail polish remover, organic solvents). 3 mm ABS edge on all sides (antistatic, rounded, light gray). EGB worktop with melamine resin coating, 28 mm thick (volume conductive). Top and underside with a conductive, light gray melamine resin direct coating. Melamine resin coating in accordance with DIN68765. Splash-proof and dirt-resistant, surface properties in accordance with EN14322/EN14323: Discharge values according to EN61340; abrasion resistance class 3A; scratch resistance N greater than 1.5; stain resistance level ? 3 (e.g. acetone, alcohol, organic solvents, white spirit); susceptibility to cracking level ? 3; reaction to cigarette burns grade 3; reaction to water vapor grade 4; safety certificate with regard to migration behavior, therefore also suitable for use in the food industry. Covering normally flammable (B2) according to DIN4102. Board core made of volume conductive chipboard in accordance with EN309/EN312 (emission class E1). Light gray, antistatic ABS edge on all sides. System substructure, W995 x D750 x H800 mm. 4-leg welded frame with two pairs of frame legs made of profile steel tube (45x45x2 mm) including depth bracing (top and bottom). Frame feet at the bottom with end element including anti-slip knob for secure footing. Cross struts made of C-profile (40x40x2 mm) at the top under the worktop (front, middle, rear) and at the bottom (rear). The frame legs are prepared for mounting/retrofitting a height adjustment and/or castor set.