RAU workbench electrically height-adjustable 2500x7900x740-1140 mm top 40 mm

Worktop with hard laminate covering (HPL), thickness 40 mm. Top surface with a 0.8 mm thick, light gray HPL laminate. Laminate in accordance with DIN EN 438, splash-proof and dirt-resistant. High abrasion resistance, high scratch and impact resistance. Resistant to weak acids and alkalis as well as common household chemicals and solvents. Flooring normally flammable (B2) according to DIN4102. Chipboard core in accordance with EN309/EN312 (emission class E1). Underside with backing. Light gray, antistatic ABS edge on all sides. 2 system substructures, W1240 x D850 x H700-1100 mm each with: 4 lifting columns (80x50 mm, tested in accordance with EN 60335-1) including control unit and connection cable with plug. Skids made of profile steel tube (100x30x3 mm) including leveling feet. Complete frame made of profile steel tube (steel tube 50x25x2.5 mm) at the top under the worktop. Control element with up/down button. Electric adjustment using the 4 lifting columns with integrated linear drive. Low-noise, stepless and absolutely synchronous adjustment of the working height, even with asymmetrical loads. Adjustment travel 38 mm/s (without load). Duty cycle 10 percent (6 minutes per hour or 2 minutes continuous operation at full load). Power consumption in standby mode only 0.1 W. CE Declaration of Conformity: The product complies with the essential requirements set out in the following harmonization legislation: a) Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC. b) Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonization of the laws of the Member States relating to electromagnetic compatibility // The following harmonized standards were applied: a) DIN EN ISO 1210:2011-03 Safety of machinery - General principles for design - Risk assessment and risk reduction. b) DIN EN 1570-1 Safety requirements for lifting tables - Part 1 (except chapters 5. 5. 5, 5. 6. 11 and 5. 10). Note: The system can optionally be operated independently via a battery box (accessory) so that no permanent connection to a power supply is required.