RAU worktable Series E 1000x500x650-1000 mm hard laminate top 30 mm

Worktop with hard laminate covering (HPL), 30 mm thick. Top surface with a 0.8 mm thick, light gray HPL laminate. Laminate in accordance with DIN EN 438, splash-proof and dirt-resistant. High abrasion resistance, high scratch and impact resistance. Resistant to weak acids and alkalis as well as common household chemicals and solvents. Covering normally flammable (B2) in accordance with DIN 4102. Chipboard core in accordance with EN 309/EN 312 (emission class E1). Underside with backing. Light gray, antistatic ABS edge on all sides. System substructure, W1000 x D500 x H630-980 mm. 2-leg frame with a pair of frame legs made of profile steel tube (45x45x3 mm) including depth bracing (center). Frame legs at the bottom with end element including level compensation and anti-slip knob for safe standing. Frame legs at the top with integrated height adjustment/height adjustment using aluminum profile (40x40 mm), the working height can be continuously adjusted using the profile groove. Cross struts made of profile steel tube (35x35x2 mm) at the top under the worktop (front, rear) and depth struts made of angle iron (40x35x2 mm) with mounting adapter (left, right). The frame legs are prepared for mounting/retrofitting a castor set. Note: This add-on table can only be attached to a base table of the same depth or greater. This extension table cannot be fitted without a corresponding base table.