TESA GT 622 elec. length meas. probe, +/- 5 mm, inst. length 67.2 mm, 2.00 N

Name: TESA GT 622 elec. length meas. probe, +/- 5 mm, inst. length 67.2 mm, 2.00 N
Brand: TESA TECHNOLOGY
SKU: 39655350

Brand: TESA TECHNOLOGY

Art.-no. 39655350

Manufacturer article no. 03230055

EAN 7630041112696

All versions

Manufacturer information

Specification

Application

For a wide variety of standard applications in multi-point measuring systems. Reliable and therefore ideally suited to automation applications. For recording measured values, the length measuring probes should be extended using compressed air. The probes are retracted by a release spring as soon as compressed air is no longer applied.

Execution

Straight, rear compressed air connection
Precise, ball-guided measuring pin
Clamping shaft diameter 8 mm, can be clamped along entire length
Cemented carbide gauge slide M2.5 with ball diameter 3 mm
5-pin plug in line with DIN 45322, cable 2 m
Lifting of measuring pins using a release spring, pneumatic infeed. This makes the system particularly reliable.

Advantage

Insensitive to lateral forces and temperature fluctuations
Excellent electromagnetic shielding
Version with Viton bellows especially resistant to coolants and lubricants

Notes

TESA check. Also available in a DC version with +/- 15 V or 0-24 V power supply and analogue DC output on request and for an extra charge

Delivery

Measuring probe, test report with conformity declaration

Technical information

Brand	TESA TECHNOLOGY
EAN	7630041112696
Manufacturer Part Number	03230055
Model	GT 622
Compatibility length measurement scanner	TESA
Max. spindle travel	10.3 mm
Measuring range of electronic length measuring technology	+/- 5 mm
Spindle lift	Automatic due to spring return
Measuring pin adjustment	Compressed air
Cable output direction	Radial
Material of bellow	Viton
Measuring span of electronic length measuring technology	10 mm
Measurement force	2 N
Repetition standard deviation acc. to DIN 1319	0.05 µm
Min./max. operating pressure	1.1-1.5 bar
Max. linearity error (L in mm, measured from electric zero point)	1 µm + (4 x L) µm
Installation length	67.2 mm
Cable length	2 m
Correction factor to GT 21/22	2.5
Supply up to electronic zero point	5 mm
Harmonized System Code	90318020
Gross Weight	0.140 kg

Documents/CAD data

Product information

CAD data (available after login)

Certificates/ Documents (2)

Data sheet

Technical data sheet

Accessory

Additional accessory:

Product

Description

Quantity

Price per

Price

DAkkS calibration inductive sensor MELUTEC

Art.-no. 30000156

x 1 Piece

labelling/lettering/engraving up to 16 chars to be specified in shopping basket

Labelling/lettering/engraving up to 16 characters (more than 16 characters available upon request)

Art.-no. 30000887

x 1 Piece

The packaging unit defines the number of articles in one package:

For example:
1x gloves: 1 pair (2 pieces)
1x bit set: 1 set (10 pieces)
1x screw: package (50 pieces)

In many areas our 8 - digit article number is structured the following way:

First 5 digits = material no . / Product no . + last 3 digits = dimensions / diameter / article no.

For example, solid carbide end mills 3x5x50mm first 5 digits 16851 + last 3 points 050

article no.: 16851050

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart.