WIHA current clamp up to 1,000 V AC CAT IV including 2x AAA batteries 45219

Simplifies your work: Large LCD display with backlighting for easy-to-read measurement results. Increases your safety: Measurement of live wires without open contacts. Makes handling easier: Simple one-handed testing without interrupting the circuit. Increases your efficiency: All relevant tests for electricians with just one measuring device. Simplifies your work: An integrated flashlight function ensures optimum lighting conditions. Increases your process reliability: Accurate measurement results thanks to LPF and TRUE-RMS measurement. Application: For multifunctional use at different locations. Standards: CAT IV 1,000 V When working on electrical systems that cannot be switched off, for example, current measurements present a major challenge. With Wiha's current measuring clamps, measurements can be carried out using the clamp fork without interrupting the circuit. Handling is made considerably easier by the contactless one-handed test. The test probes enable further tests: Voltage measurements in the AC and DC range as well as resistance, frequency and capacitance measurements. They also enable continuity tests and diode tests. This multifunctionality significantly increases efficiency. The measurement results can be read immediately and beyond the measurement process thanks to a large LCD display with backlight and data hold function. An additional signal tone indicates the current flow during the continuity test. Thanks to the integrated flashlight function, the Wiha current clamp meter also offers optimum lighting conditions, even in poorly lit working environments. Together with the true RMS function, the LPF function increases the process reliability of your test by providing interference-free RMS values. In accordance with measurement category CAT IV up to 1,000 V, the current clamp meter offers maximum safety for work directly on sources of low-voltage installations. IP40