WIHA voltage tester Volt Detector EX-protected non-contact single-pole 44309

Increases your efficiency: Integrated, bright LED flashlight. Saves time: Fast voltage testing thanks to non-contact measurement. Increases your flexibility: Voltage tester covers a wide voltage range from 12-1,000 V AC. Increases your efficiency: Can be used for all sockets worldwide thanks to internationally adapted measuring tip. Application: For detecting and localizing live conductors, cable interruptions and breaks, blown fuses, defective lamps on fairy lights and single wire detection. Before starting an electrical installation, electricians must ensure that the working environment is voltage-free. A voltage tester is required to test alternating electrical fields or locate suspected sources of faults. The Wiha non-contact voltage tester provides an initial indication of the absence of voltage thanks to its visual and acoustic signal. After switching on, the permanently green LED indicates that the device is ready for operation. During the voltage test, the LEDs light up from blue (weak) to orange to red (strong) depending on the strength of the alternating electric field. Two AAA batteries are required for use, which are included in the scope of delivery. If the device is not used for 4 minutes, it switches off automatically to save energy. An integrated LED flashlight enables the measuring point to be illuminated in dark surroundings and can be used as a flashlight by switching it on and off manually. Thanks to its handy size, the voltage tester with clip-on clip fits comfortably in any shirt or trouser pocket. Thanks to the internationally adapted measuring tip, the voltage tester is suitable for all types of socket outlets worldwide. The single-pole voltage tester complies with the EN 61010-1 / IEC 61326 standard and is designed for CAT IV 1,000 VAC. The tool is also approved in accordance with the ATEX standard for use in potentially explosive atmospheres (category II). For electrical applications Before and after each use, the voltage tester must be tested on a known voltage source to ensure its functionality. EN 61010-1, IEC 61326, IP67